Choose Vitrified Bond Or Resin Bond Processing HVOF Coating?

There are two kinds of bonding agents for silicon carbide: vitrified bonded and resin bonded. Vitrified bond grinding wheel can withstand the high grinding speed and precise fitting tolerance, and it free from water, acid. oil and temperature change of the effect, but requires that the grinding machine speed is less than the safe operating speed of grinding wheel, usually less than 33m/s.Resin bond grinding wheel can be used for higher grinding speed and higher finish.



The diamond grinding wheel usually uses resin bond, because the vitrified bond diamond grinding wheel has a high manufacturing process, and the large-sized grinding wheel is often used in the grinding thermal spray process. Vitrified bond is difficult to reach the dimensional standard, so the resin bond is usually used.
DRAWING&SPECIFICATION

More Super Hard Products Co., Ltd

Type

Diameter(inches)

D(mm)

H(mm)

X(mm)

T(mm)

U(mm)

1A1

4''

100

20

6

12

 

1A1

100

20

10

10

 

1A1

100

20

10

12

 

1A1

100

25.4

10

20

 

1A1

8''

200

76.2

10

25

 

1A1

12''

300

76.2

10

25

 

1A1

300

127

10

25,30,40

 

1A1

300

127

25

50

 

14A1

300

127

6,10

40

10

14A1

300

127

10

40

15

1A1

16''

400

127

10,25

25

 

1A1

400

127

10

30,40,50

 

1A1

20''

500

203

10

15,20

 

1A1

500

254

38

25,50

 

1A1

24''

600

254

25

25

 

1A1

600

304.8

5

40

 

1A1

600

203

25

50

 

1A1

600

304.8

10

50

 

1A1

30''

750

304.8

10

40,50

 

1A1

35.4''

900

304.8,305

10

50,75

 

1A1

36''

914.4

304.8,305

10

50.8

 

1A1

43''

1100

304.8

10

50

 

We can also customized according to your requirements.


Anna.wang@moresuperhard.com
Whatsapp:+86 15617785923

评论

发表评论

此博客中的热门博文

Different from the past grinding -HVOF grinding technology

图片
N ew materials often cause a domino effect on aerospace processing technology. Environmental problems have forced a change in materials from traditional chromium electroplating to HVOF spraying coating, which in turn affects the selection of grinding wheels and ultimately the selection of grinding machines themselves.   It swings between two lines The HVOF coating materials in aviation parts has had a positive impact on the aerospace industry. HVOF coating materials are not only more environmentally friendly but also more resistant to wear and tear and therefore last longer. During the migration, there is also a shift in the grinding process used to produce the parts. While resin-bonded diamond wheels are an old standard, vitrified bonded diamond wheels are now more popular because resin-bonded diamond wheels cannot be dressed in machines. This poses a challenge to maintaining consistency. By using a vitrified bonded diamond grinding wheel, one can use a rotary dresser and a rotar...
阅读全文

Single crystal diamond burnishing tool

图片
  The workpiece usually appears some tiny tool marks after machining. It requires one more step – “polishing” for reach superior surface finishing. However, this work slows down production efficiency a lot. “More Super Hard” launches a burnishing tool which is made of single crystal diamond now. The tools apply a certain pressure on the surface of workpiece, it generates plastic flow on the surface of workpiece, and then fill in the low through, that to achieve better surface finishing.   Single crystal diamond burnishing tool not only improves the corrosion resistance and surface quality of the workpiece, but also improves the machining efficiency.   1. The hardness of single crystal diamond burnishing can reach 10,000 HV, with the characteristics of strong wear resistance and low friction coefficient, it only takes a few seconds to process the surface of the processed workpiece to the required surface accuracy. 2. The efficiency of single crystal diamond burnishin...
阅读全文

Why use vitrified bond for grinding wheels?

图片
Compared with resin grinding, vitrified bond diamond grinding wheels have the following advantages: (1) The grinding efficiency of vitrified grinding wheels is high. (2) Large feeds can be used for vitrified grinding wheels. When the feed rate exceeds a certain amount, the resin grinding wheel will not be able to grind. (3) The vitrified bond diamond abrasive tool hardly needs to be trimmed when grinding, and the resin abrasive tool needs to be trimmed once in a period of time. (4) due to vitrified The shape retention of the grinding wheel is good, so the grinding accuracy is higher than that of the resin grinding wheel, so it has become the first choice for precision and ultra-precision machining. Contact: Miss. Anna Mobile/What's App:+86 15617785923 Skype:Annawng   WeChat: 15617785923 E- mail: A nna.wang@moresuperhard.com www.moresuperhard.com www.pcdgrinding.cn www.morediamondwheel.com www.mogrinding.com www.morecuttingtools.com www.moresuperhard.cn  
阅读全文